Anuncio

Colapsar
No hay anuncio todavía.

Unlock Huawei MYA-L03 NCK

Colapsar
X
  • Filtrar
  • Tiempo
  • Mostrar
Limpiar Todo
nuevos mensajes

  • Unlock Huawei MYA-L03 NCK

    Saludos compañeros.

    Después de tanto batallar les comparto mi experiencia con este modelo para su liberación con nck

    Abrir nck modulo Android mtk

    1.- Seleccionar procesador MT6735
    2.- Seleccionar Modo META
    3.- Direct Unlock
    $.- Apagado con Volumen menos y conectar usb
    5.- Cobrar y cobrar bien

    En menos de un minuto equipo liberado.

  • #2
    funciona ala perfección gracias por tu ayuda

    Comentario


    • #3
      ya lo intente asi tal cual pero no lo desblokea nunca repeti el proceso muchas veces drivers instalados correctamente y nada este es el log todo parece correcto

      Selected connection metod: META Mode
      Exe version: NCKBox AndroidMTK 1.8.9.1
      Selected model: MT6735
      Action: Unlock
      Scanning for presents meta ports...
      Phone must be off with battery inside.
      Please insert USB cable now...
      In some phones need to keep VOL- button untill inserting USB cable.
      [8]Detected: MediaTek USB Port (COM8)
      \\?\usb#vid_0e8d&pid_0003#5&6032f3f&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
      Starting META mode, wait...
      Restarting to meta,wait....
      If drivers missing, please install CDC drivers.
      This can take up to 5 min on slow phones.
      If take too long, check device manager for drivers.
      [10]META Port Detected: MediaTek USB VCOM (Android) (COM10)
      USB\VID_0E8D&PID_2006&MI_02\6&1C7E7F64&0&0002
      Start sync target, waiting responce.....
      [AP]BaseBand CPU : mt6737t,S01
      [AP]APP_VER: Maya-L03C212B120
      Making target channel configuration, wait...
      Making tunnel configuration, wait...
      Rebooting to meta, wait....
      [META]BaseBand CPU : MT6735, E00
      [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V94.P55
      [META]HW_VER : HQ6737T_66_1HA_M0_HW
      Phone imei[1] : 86265
      Start direct unlock[SIM1]
      Simlock data not found(2).
      Clean Boot flag ok.
      All done.


      todo bien y nomas no lo desbloquea alguna pista saludos

      Comentario


      • #4
        esto es con meta

        Selected connection metod: META Mode
        Exe version: NCKBox AndroidMTK 1.8.9.1
        Selected model: MT6737T
        Action: Unlock
        Scanning for presents meta ports...
        Phone must be off with battery inside.
        Please insert USB cable now...
        In some phones need to keep VOL- button untill inserting USB cable.
        [8]Detected: MediaTek USB Port (COM8)
        \\?\usb#vid_0e8d&pid_0003#5&6032f3f&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
        Starting META mode, wait...
        Restarting to meta,wait....
        If drivers missing, please install CDC drivers.
        This can take up to 5 min on slow phones.
        If take too long, check device manager for drivers.
        [10]META Port Detected: MediaTek USB VCOM (Android) (COM10)
        USB\VID_0E8D&PID_2006&MI_02\6&1C7E7F64&0&0002
        Start sync target, waiting responce.....
        [AP]BaseBand CPU : mt6737t,S01
        [AP]APP_VER: Maya-L03C212B120
        Making target channel configuration, wait...
        Making tunnel configuration, wait...
        Rebooting to meta, wait....
        [META]BaseBand CPU : MT6735, E00
        [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V94.P55
        [META]HW_VER : HQ6737T_66_1HA_M0_HW
        Phone imei[1] : 862650
        Start direct unlock[SIM1]
        Simlock data not found(2).
        Clean Boot flag ok.
        All done.


        esto es con flash

        Selected connection metod: FLASH Mode
        Exe version: NCKBox AndroidMTK 1.8.9.1
        Selected model: MT6737T
        Action: Unlock
        Reinsert phone battery.
        Battery must be charged.
        Phone must be off with battery inside.
        Please insert USB cable now...
        Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
        Boot mode: Preloader
        Using Algo 2.
        Phone detected...Please wait
        Sending DA agent, please wait...
        First stage DA fail, aborting
        BBCHIP MT6737T
        [SECURE BOOT]Not supported by exe or wrongly selected, aborting
        If model is listed, please select correct model
        If model is not listed, use custom DA from phone firmware
        Boot Fail.!!!.

        seleccionando por procesador por que no aparece el modelo en la lista
        Editado por última vez por pepelupek; http://comunidadcelular.com.mx/member/6487-pepelupek en 20/06/18, 14:20:42.

        Comentario

        Trabajando...
        X